Materials & Quality
BLEE Amusement is a professional indoor playground equipment manufacturer providing safe, durable, and certified materials for commercial indoor playground projects. From soft play equipment to interactive indoor games, our strict quality control ensures long-term performance and profitability for turnkey indoor playground solutions worldwide.
Steel Pipes and Fasteners
Steel Fasteners
Steel Fastener (steel one anti-rust) (Extra 8%-10% for spare) A, (All screw must already set up,with 10% extra screw)
Steel Pipes
Steel Pipes (Hot galvanizing anti-rust Dia48mm Pipe with 2.5mm wall thickness)(Extra 4-7 pipe for spare) Our steel pipes are hot-dip galvanized steel pipes, where the entire steel pipe is immersed in a bath of molten zinc, so the inside and outside of the pipe will not rust for many years.
Plastic Parts
(Made by good plastic with wall thickness over 5mm)
A. Must do trial installation and take photo. place on riaht postion for inpect the size and aap. If anv tube with slope must assemble soft pad on Fo vertical assembled tube must check if horizontal with platfoam, Add soft platform under it make sure in a line with platform.
B. Tube and other plastic slide must do trail install, So can make sure exit on right postion not blocked by any vertical pipe&passageway. (metalsupport should test and packing), Need mark from top to bottom by code S1, S2, S3..)
C. Helicopter, Square cube, train head, and all plastic parts with hard bottom need soft pad for protect.
D. Space Capsule, Helicopter, watchtower and all plastic parts which stretch out structures should have metal for support.
E. Any Plastic need open window or glass, the window should be assembled before packing, connecting ring should be assembled on.
F.Screw on right length, must be packing with 10% extra for spare.
G.Must have soft cover if no pannel on plastic entrance, Single slide over 140cm need soft platform under it (height adjust according to story height)
◼
Cross obstacle, Punching bag, all kinds of hanging obstcle and rope.
A.Our punch bags are fully stuffed with foam and wrapped with our strong PVC tarpaulin making it bouncy and giving the punch bags a plump look.
B.They are attached to the structure using a steel harness which is very reliable and durable and also gives the ability to allow full range of rotation.
C.The steel harnesses is covered with soft padded PVC covers for the children’s safety in addition to also giving the enitre playground its upscale finish.
Woven Parts
Including platforms, single-plank bridges, cable bridges, tunnels...all parts using woven materials
Woven Platform Reinforcement for Bridge Safety
The woven platform must be made into a surrounding pipe (only the places under the bridge where children do not actually walk are assembled with steel bars and metal rings) PS: Additional woven platforms are required under large-hole bridges such as cable bridges and rope bridges.
Staggered Woven Platform for Safety
The woven platform cannot share a horizontal pipe and must be staggered with a net height of 10cm+ (the woven platform is assembled with steel bars and can share the same pipe for detours)
Foam cover, Ribbon & Security net
A.Foam cover：Our foam pipe covers are 72″ thick with the diameter of the pipes being 3.34″. The PVC vinyl has a pure and bright color and is also UV-resistant making sure the pipes stay flexible and durable even when exposed in sunlight. The foam pipe covers of other companies might only be 7cm with the diameter of the pipes being only 3.1″ as well as having PVC vinyl that is not UV-resistant causing the colors to fade and the PVC vinyl itself to become fragile over time.
B.Ribbon:The zip ties used to tie the foam pipes to the steel pipes are made of high quality plastic, making it flexible yet still tough.We use generously more zip ties to tie the foams onto the steel pipes, the space between our zip ties is 5″to 6″, in comparison with 9″ to 10″ of space of some other manufacturers.
C.Security net：Our safety nets are fire-resistant and tightly woven, certified for use even in outdoor sports.Our fire-resistant anti-climbing nets will be used on the first level of the playground to prevent children from climbing onto the outside of the structure.
Vertical and horizontal obstacles
A. Vertical plate obstacles are fixed by three long arm fasteners B. Vertical triangular obstacles are fixed by two two-way long arm fasteners, and screws must be embedded (the installer must first unscrew the screws) C. Horizontal obstacles that need to be fixed on the platform must be embedded with screws (the installer must drill holes on the platform for the screws to pass through)
Ball Pools
The balls that we provide for our ball pools/pits are of the best quality and come in multiple bright and fun colors. We place stairs at the entry area from outside and exit area from inside of the ball pool / pit. This will make it easier the kids to enter in and exit out of the ball pool. In addtion to standard balls we also carry GermBlock balls which are proven to resist germs from children.
Trampolines
Our commercial-grade trampolines use reinforced metal frames and strengthened components, including custom heavy-duty springs, to ensure stability and durability. The jumping mats are made from thick trampoline fabric, reinforced with nylon webbing and edge stitching for wear resistance and reliable use. Designed for high-frequency commercial operation, they maintain consistent performance over time.
Deck Boards
The deck boards feature rounded corners to eliminate gaps with pipes and are fully padded with oversized sponge for a soft, safe touch and full edge protection. The foam is 1.4″ thick, with at least 0.7″ thick wooden boards for support. The surface is covered with durable 1000D, 0.55 mm PVC tarpaulin. Fully wrapped on all sides, the boards ensure safety, comfort, and an attractive appearance for children.
Climbing stair, Rainbow arch bridge
A.Our ramps and stairs have a layer of high density EVA foam similar to the materials used in making our EVA floor mats. This layer of high density EVA foam will enable the ramps and stairs to withstand the treading’s of the kids and yet still maintain its original shape for years to come.
B.The sides of the ramp are tied directly to the safety netting to make sure that there no gaps or spaces in between.
C.Metal pipe should be assembled, Using 1000D matt PVC, Standard length as below.
Level 1 to level 2:
Story height:125cm,L= 261cm. Story height:135cm,L= 265cm. Story height:140cm, L= 268cm. Story height:150cm,L=272cm. Story Story height:170cm or more than 180cm,L=277cm(because need add starting platform)
Above level 2:
Story height:125cm,L=265.Height:130cm,L=267. Height:135cm, L=270. Height:140cm,L=272. Height:150cm,L=277. Height:160cm, Above stair and bridge must incluing one PVC rim with Button- holing (incase any fall of kids)
Indoor Playground Slides
Our slides meet the safety standards of American ASTM and European EN.
Wave Slides
Our fiberglass wave slide is made of colored gel which is abrasion-resistant and highly durable. The wave slide gel will help to keep a brightly colored and glossy surface even after many years of usage.
The body of our fiberglass slides are almost twice as thick as the slides of some other companies.
Our wave slides are built with railings on the sides to keep the children safely on their own slide chutes.
The sides of the slide structure are enclosed by anti-climb netting with small mesh to prevent children’s fingers from getting caught in the netting and also to prevent the kids from climbing up the slide.
We install a big and thick soft mat at the end of our long exit section.
The safety netting is also extended to surround the sides of the landing/exit area to prevent collision accidents between children who are exiting the slides and other children.
Spiral Tube Slides
Our spiral tube slides can comes with clear windows that are covered by a strong and clear lens made of the same materials used in manufacturing bullet-proof windows.
The landing/exit area of the slides are surrounded by safety netting to prevent collision accidents between the children who are exiting the slides and the other children.
(We suggest using heavy duty slide)
1. Must do trial install to test height for entrance of slide, adust the height of platform in a line.
2. Must do trial install o measure the exactly length,make sure have soft pad for landing (Pad made by 2cm wooden+ 2cm foam+4cm
3. Inspecter must check color, workmanship, the cut open for support on pipe.
4. Other fiber glass decration parts like tiger head,dragon head,monkey head must assemble pannelon and do support under it.
Get in touch with us
Thank you for your interest in our products and services!
We’re dedicated to providing you with the best possible support and solutions for your needs.